Bridged Layers

The bridged layers are specially made so that they won't fall apart or lose 'islands' when you cut them.

Layer 1

snow

Layer 2

darkkhaki

Layer 3

dimgray

Layer 4

darkslategray

Using the Stencils

Cut out and paint your four-layer stencil of Black Horse. Decide whether you will use the natural surface color as one of your layers. For example, if your surface color is close to the color snow , then you may choose to omit the first layer since the surface has this color already. Download the free cut files to cut this stencil of Black Horse yourself. Or upload your own image to turn it into a stencil.

Upload Photo

Remove background

Choose Image

Pick an image and crop it as closely as you can.

We'll send your stencilized image to this email in about 2 minutes.

By uploading, you agree to the terms and conditions.

Your custom SVG download

For basic one-panel stencils, the default values are fine.
Or, to customize your download, open each drawer to edit. You can always come back and do it again (for no additional charge).

panel(s) per layer

Final image is (w) x (h) inches

Stencils smaller than 5 inches on either side are not recommended.

inches

Final image dimensions (side-to-side, top-to-bottom) of your painted stencil.
Cut media are (w) x (h) inches, with margin inches

Margin must be less than half the media height or width, whichever is smaller.

Media width (in)

Media height (in)

Media margin (in)

Media dimensions (what you cut your stencil panels from), including desired margin (the space along the edge that won't be cut).
Bridges smaller than 0.01 inches or larger than 1 inch will probably not result in a usable stencil.

Stable bridges

No bridges

Bridge Width (in)

Bridge width is usually set from 0.03 (for laser cutter) to 0.05 or larger (for blade cutters).

4 layers x panel(s) per layer = panels total.

Tip #16:

Repeating stencils for wall and floor

Did you ever want to cover the wall of a room with tractors? I did. Stencils are a great way of reproducing a wallpaper effect, but with your custom image. Use MidJourney's 'tile' option to create endless variations of repeating patterns. Choose the one you like best, and Bay Stencil turns it into a cuttable, paintable SVG stencil.
All tips

Floppiness	6.39	stencil is stable, not too floppy
Cuts	1.36	stencil will probably cut in reasonable time
Cavities	11	not too many holes

Floppiness	6.36	stencil is stable, not too floppy
Cuts	1.4	stencil will probably cut in reasonable time
Cavities	59	stencil has lots of openings, and may be hard to weed on a craft cutter

Floppiness	6.6	stencil is stable, not too floppy
Cuts	2.06	stencil will probably cut in reasonable time
Cavities	62	stencil has lots of openings, and may be hard to weed on a craft cutter

Floppiness	6.55	stencil is stable, not too floppy
Cuts	1.61	stencil will probably cut in reasonable time
Cavities	34	not too many holes

Black Horse Stencil

Description