Atari Joystick Stencil

Cut out this vector file by hand or on GlowForge laser cutter or any craft cutter. Re-use the stencil of the joystick by cleaning it and letting it dry flat. Create countless electronics memes by using stencils in combination. Categories: computers electronics

Upload Photo

Remove background

Choose Image

Use the blue handles to crop as closely as you can.

We'll send your stencilized image to this email in about 2 minutes.

By uploading, you agree to the terms and conditions.

Your custom SVG download

For basic stencils, the defaults are fine.
To customize your download, open each drawer to edit.

panel(s) per layer

Final image is (w) x (h) inches
with margin inches

Stencils smaller than 5 inches on either side are not recommended.

in.

Final image dimensions of your painted image.

Margin in inches.
Bridges smaller than 0.01 inches or larger than a half-inch will probably not result in a usable stencil.

Stable bridges

Fewer bridges, pretty stable

One bridge per island

No bridges

Bridge Width (in)

Bridge width is usually set from 0.04 (for laser cutter) to 0.06 or larger (for blade cutters).
Cut media at least x inches

Media width (in)

Media height (in)

Media dimensions (what you cut your stencil panels from). Smaller dimensions cause your stencil layers to be divided up into panels.

4 layers x panel(s) per layer = panels total.

Tip #15:

Try a halftone CMYK stencil

Sometimes you just want to reproduce as many colors and details of an image as you can. But who wants to cut and paint 20 layers just to get 20 shades in the final image? With a CMYK color-separated stencil, you use just three colors: Cyan, Magenta and Yellow; plus black, to reproduce the full gamut of color.

Atari Joystick Stencil

Upload Photo

Check this box to remove the background of the image.

Your custom SVG download