Jimi Hendrix, Stevie Ray Vaughan, Mark Knopfler and Ry Cooder are just a few guitarists known to have made this Fender guitar their own. It was the first solid body electric guitar that did not substantially resemble an acoustic guitar. Its assymetrical d
The bridged layers are specially made so that they won't fall apart or lose 'islands' when you cut them.
| Floppiness | 6.42 | stencil may have floppy parts |
| Cut Length | 1.98 | stencil will probably cut in reasonable time |
| Cavities | 20 | not too many holes |
| Floppiness | 6.52 | stencil may have floppy parts |
| Cut Length | 0.9 | stencil will probably cut in reasonable time |
| Cavities | 29 | not too many holes |
| Floppiness | 5.63 | stencil may have floppy parts |
| Cut Length | 0.39 | stencil will probably cut in reasonable time |
| Cavities | 6 | not too many holes |
| Floppiness | 5.93 | stencil may have floppy parts |
| Cut Length | 0.99 | stencil will probably cut in reasonable time |
| Cavities | 40 | not too many holes |
| Floppiness | 6.27 | stencil may have floppy parts |
| Cut Length | 1.39 | stencil will probably cut in reasonable time |
| Cavities | 51 | stencil has lots of openings, and may be hard to weed on a craft cutter |
Cut out and paint your five-layer stencil of Stratocaster. Decide whether you will use the natural surface color as one of your layers. For example, if your surface color is close to the color snow , then you may choose to omit the first layer since the surface has this color already. Download the free cut files to cut this stencil of Stratocaster yourself. Or upload your own image to turn it into a stencil.
Download all SVG files needed to cut the stencils.
Variant #3
Cut this stencil on your craft or laser cutter. It comes with both SVG and JPG files.
Come back to this page as often as you like to customize your download. You can change:
In addition, you can download SVGs for any of the other variants, or the halftones, at no additional charge.
FREE!
Missing something? Check your email for links.